KADOKAWA Official Site Purchase Bonus
"Boxer" 57mm Scattershot ×1
*Bonus is in addition to the "Boxer" 57mm Scattershot already included with product.
*Bonus not included with purchases made on the Good Smile Company Online Store.
*Domestic sales are exclusive to the KADOKAWA Official Site.
*Products with limited bonuses may also be sold overseas.
*Bonus is in addition to the "Boxer" 57mm Scattershot already included with product.
*Bonus not included with purchases made on the Good Smile Company Online Store.
*Domestic sales are exclusive to the KADOKAWA Official Site.
*Products with limited bonuses may also be sold overseas.
KADOKAWA Official Site Giveaway Campaign
For Preorders Made on the KADOKAWA Official Site
Individuals who preorder from the KADOKAWA Official Site will be entered for a chance to win a shikishi set with real autographs by the voice actors of Sousuke Sagara (Tomokazu Seki) and AL (Takehiro Murozono)!
*Purchases made on the Good Smile Company Online Store are not eligible for this giveaway.
Individuals who preorder from the KADOKAWA Official Site will be entered for a chance to win a shikishi set with real autographs by the voice actors of Sousuke Sagara (Tomokazu Seki) and AL (Takehiro Murozono)!
*Purchases made on the Good Smile Company Online Store are not eligible for this giveaway.
Product Description
The Arbalest from Full Metal Panic! is here as a plastic model!
The AS (Arm Slave) Arbalest piloted by Sousuke Sagara in "Full Metal Panic!" joins the KADOKAWA PLASTIC MODEL SERIES! All of its tactical modes: Normal Mode, ECS Activation Mode, and Lambda Driver Activation Mode, can be fully recreated for the first time in plastic model form!
・Under the supervision of mechanical designer Kanetake Ebikawa, realistic mechanical details have been condensed into an approximately 177 mm-tall body.
・The model consists of parts made with colorful materials and pre-painted parts, enabling the completion of a realistic AS by simply assembling it.
・The movable mechanisms with wide ranges of articulation enable the recreation of iconic poses, including shooting and slashing poses.
・By deploying armor parts and exchanging parts, the ECS (Electronic Conceal System) Activation Mode can be fully recreated.
・The 42 lenses placed across the body are recreated with pre-painted parts.
・The Lambda Driver Activation Mode can be faithfully recreated by deploying armor parts and exchanging certain sections with heat-radiation fin parts.
・The cockpit opening/closing mechanism has been recreated based on the setting materials. The chest block slides forward, allowing the hatch to open and close.
・A wide variety of weapon parts are included, such as the "Boxer" 57mm Scattershot and Monomolecular Cutter featured in the series.
・The Anti-tank Daggers and Hand Grenades can be stored within the chest weapon bays.
・The Anti-tank Dagger mounted on the head can be recreated by exchanging head parts.
・Various hand parts are included: clenched fists, open, open (relaxed), Monomolecular Cutter-gripping, general weapon-gripping, and firearm-gripping hand parts.
*Nippers are required to assemble this product.
*The included figure requires painting.
*The images are of painted prototypes and may differ from the actual product.
・Wire Gun Firing State Recreation Parts
The firing state can be recreated by attaching the parts to the arm-mounted wire guns.
・Monomolecular Cutter Blade Part - Silver-Plated Ver.
A blade with a metallic, silver-plate finish is included.
・Lambda Driver Heat-Radiation Fin Parts - Black-Plated Ver.
Heat radiation fin parts with a solid black-plated finish are included.
・Special Display Base Designed by Kanetake Ebikawa
・A special display base designed by Kanetake Ebikawa is included.
This is a special-edition item with intricate designs on the base itself and even the support pillar.
A nameplate to further enhance displays is also included.
(Display base size: Approx. W160 × D120 × H10 mm)
・Special Packaging
A special sleeve that can store both the main package and the special set accessories is included. The cover features a newly drawn illustration by illustrator Naochika Morishita.
Product Contents
・Main model ×1
・Hand parts ×6 types
・"Boxer" 57mm Scattershot ×1
・Monomolecular Cutter ×1
・Anti-tank Daggers ×2
・Anti-tank Daggers (stored state) ×2
・Anti-tank Daggers (for head part) ×2
・Hand Grenades ×2
・ECS Mode recreation parts ×1 set
・Lambda Driver heat-radiation fin parts ×1 set
・Sousuke Sagara (pilot suit) Figure ×1 set
・Wire Gun firing state recreation parts x2
・Monomolecular Cutter Blade Part - Silver-Plated Ver. ×1
・Lambda Driver heat-radiation fin parts - Black-Plated Ver. ×1 set
・Special Display Base Designed by Kanetake Ebikawa ×1 set
・Limited-Edition Special Design Package
・Under the supervision of mechanical designer Kanetake Ebikawa, realistic mechanical details have been condensed into an approximately 177 mm-tall body.
・The model consists of parts made with colorful materials and pre-painted parts, enabling the completion of a realistic AS by simply assembling it.
・The movable mechanisms with wide ranges of articulation enable the recreation of iconic poses, including shooting and slashing poses.
・By deploying armor parts and exchanging parts, the ECS (Electronic Conceal System) Activation Mode can be fully recreated.
・The 42 lenses placed across the body are recreated with pre-painted parts.
・The Lambda Driver Activation Mode can be faithfully recreated by deploying armor parts and exchanging certain sections with heat-radiation fin parts.
・The cockpit opening/closing mechanism has been recreated based on the setting materials. The chest block slides forward, allowing the hatch to open and close.
・A wide variety of weapon parts are included, such as the "Boxer" 57mm Scattershot and Monomolecular Cutter featured in the series.
・The Anti-tank Daggers and Hand Grenades can be stored within the chest weapon bays.
・The Anti-tank Dagger mounted on the head can be recreated by exchanging head parts.
・Various hand parts are included: clenched fists, open, open (relaxed), Monomolecular Cutter-gripping, general weapon-gripping, and firearm-gripping hand parts.
*Nippers are required to assemble this product.
*The included figure requires painting.
*The images are of painted prototypes and may differ from the actual product.
・Wire Gun Firing State Recreation Parts
The firing state can be recreated by attaching the parts to the arm-mounted wire guns.
・Monomolecular Cutter Blade Part - Silver-Plated Ver.
A blade with a metallic, silver-plate finish is included.
・Lambda Driver Heat-Radiation Fin Parts - Black-Plated Ver.
Heat radiation fin parts with a solid black-plated finish are included.
・Special Display Base Designed by Kanetake Ebikawa
・A special display base designed by Kanetake Ebikawa is included.
This is a special-edition item with intricate designs on the base itself and even the support pillar.
A nameplate to further enhance displays is also included.
(Display base size: Approx. W160 × D120 × H10 mm)
・Special Packaging
A special sleeve that can store both the main package and the special set accessories is included. The cover features a newly drawn illustration by illustrator Naochika Morishita.
Product Contents
・Main model ×1
・Hand parts ×6 types
・"Boxer" 57mm Scattershot ×1
・Monomolecular Cutter ×1
・Anti-tank Daggers ×2
・Anti-tank Daggers (stored state) ×2
・Anti-tank Daggers (for head part) ×2
・Hand Grenades ×2
・ECS Mode recreation parts ×1 set
・Lambda Driver heat-radiation fin parts ×1 set
・Sousuke Sagara (pilot suit) Figure ×1 set
・Wire Gun firing state recreation parts x2
・Monomolecular Cutter Blade Part - Silver-Plated Ver. ×1
・Lambda Driver heat-radiation fin parts - Black-Plated Ver. ×1 set
・Special Display Base Designed by Kanetake Ebikawa ×1 set
・Limited-Edition Special Design Package
Where to Purchase
■Good Smile Company Online Store
All orders placed on the Good Smile Company Online Store during the specified preorder period are guaranteed to be fulfilled.*
*Please note that this does not apply to orders with incorrect payment and/or shipping information provided.
*Dates and times listed are in Japan Standard Time (JST) unless otherwise stated.
*Please note that this does not apply to orders with incorrect payment and/or shipping information provided.
*Dates and times listed are in Japan Standard Time (JST) unless otherwise stated.
■International Partner Shops
This product is available from our partner shops.
Please see the following listing to find a partner shop in your area: Partner Shop Listing
Please see the following listing to find a partner shop in your area: Partner Shop Listing
Product Specifications
-
Series
-
Full Metal Panic!
-
Specifications
-
Ready-to-assemble plastic model kit. 1/48 scale. Approximately 177mm in height.
-
Planning Cooperation
-
Fantasia Bunko Editorial Department
-
Planning
-
DENGEKI HOBBY WEB
-
Production
-
KADOKAWA PLASTIC MODEL SERIES
-
Manufacturer
-
Distributed by
-
Good Smile Company
-
©Shouji Gatou, Shikidouji, Kanetake Ebikawa
Considerations
About This Product
- Images shown are sample prototypes. Some specifications may differ from the actual product.
About Orders for This Product
- Purchases are limited to 3 per person.
- Preorders for this item may close during the preorder period without prior notice.
- Payment for pre-ordered items made with a credit card or PayPal will be processed 2–3 weeks before the confirmed shipping date (except for Taiwan). However, for some high-priced items, payment may be required at the time of order, even if using a credit card or PayPal.
- Items may not be available for purchase depending on your region. Please log in or check with your local partner shop for item availability.